Elevator Installation
Not all elevator installations are the equivalent. The procedure can contrast, depending upon the size of the structure, the size of the elevator, and, obviously, the power source that drives the elevator. Having said this, introducing hydraulic elevators is not quite the same as introducing cable-driven elevators or pneumatic elevators.
Know more about the installation of home elevators.
Pit and Landings – The first task of installing a hydraulic elevator is creating the pit and landings. Like most common elevators, a pit must be dug a few feet below the foundation or ground floor of the building. After the pit is dug, an additional hole must be dug to house the piston cylinder.
Find the best elevator manufacturers in India
The Hoistway – Hoistways can be built one of two ways. The first is modularly. A modular hoistway is constructed off-site and then brought in to be installed as one piece. This is the easiest and fastest way of erecting a hoistway, granted you have access to a crane. If you don't have access to a crane or if the location makes operating one difficult or dangerous, the second method is to stick build the hoistway. Stick building is done on-site and takes longer to build; however, it is generally a good, solid way of constructing the shaft.
Power and Safety – After the hoistway has been erected and the pump is attached to the piston, it is time to secure the elevator car and hook up the hydraulic power. In order to supply power, electrical disconnects must be installed. Also, hydraulic oil must be added to the fluid tank and piping must be installed between the elevator jack and the power unit. Once this is done and all systems have been checked, the elevator is ready to run. For safety reasons, self-closing and locking doors, climate control, emergency lights, emergency communication, and smoke detectors will be installed.
Know more about elevator price in India
No comments:
Post a Comment